Quality glue holder
Outstanding quality and packaging. The best glue holder you can buy! Absolutely Top Notch!!!!! Very thankful, KD
After spilling Tamiya quick setting all over my brand new tankcraft mat and erasing part of the print I should have bought this first!!! Heavy and will not tip!
Got this for my Husband and he loves it - as for someone who says they are clumsy, this holder is great for avoiding mishaps!
Finally a spill proof glue holder that also is going to slip and slide on the work surface
Fits my Mr Cement bottles perfectly. Heavy and doesn't slide around. Must have item for the hobby.
Very sturdy and solid
Extremely well made and looks great. Super nice addition to the bench
This thing is a solid piece of metal. This reminds me of when things were made solid and not out of cheap plastic. It does what it says hold your glue so you don't have an accident and ruin something. Yes, you probably could find something that does the same thing for less. But this thing is solid and has a satisfying weight, it's mean and it's green. It's worth the money for the construction and I just like having it on my bench!
At first I thought these glue holders were just a flashy gimmick, but wow it's actually extremely useful. I didn't realize the bottom had a grippy pad so that I can open and close the glue one-handed while holding parts together with my other hand - very clever. Not just stylish but functional!
So far so good. Nice and heavy compared to a lot of other choices on the market.
Works great! just a cool little holder!
Great product. No more spilled bottles
Why spend 27 USD on a glue bottle holder?
I can only give you my perspective:
- I needed one. I ruined both cutting mats and kit parts by having knocked over two glue bottles. The extremy well-flowing ‚Extra Thin‘ cement, of course - it never happened with the standard one.
- I do like well-made, cool looking stuff and gimmicks. And the Tankraft glue holder does not disappoint here: Heavy, massive, all metal, well machined, spotless coating, nice graphics and logos, a cutout to leave no doubts about what glue is in there, full surface non-slip rubber mat on the underside. A fully functional eye catcher on every bench.
- It‘s one of those ‚once in a lifetime‘ expenses, so who cares about a buck or two or five saved on a cheaper alternative?
- I wanted one.
It does fit the square Mr Cement bottles a bit better. The Tamiya square ones are slightly smaller and tend to rattle a bit more, but still nothing too troublesome. A bit of self-adhesive sticky mat on the side walls might do the job for perfectionists.
The holder comes with a well- fitting foam insert for round glue bottles, but as I don‘t have any I can‘t comment on that.
Highly recommend for form, function and coolness factor!
Love the look and weight of the green anodized aluminum. Definitely the best holder I've tried for any of the small square bottles favored by many companies these days.
Great item. I have two now and I do not worry about spilling and model cement. It is worth it modelers and it dresses your work space up. Thanks again TANKRAFT.
Perfect, I was actually thinking of hiring a machinist to fabricate something very similar, no need to now. Thanks.
Love the glue base holder. Excellent workmanship. Nice and heavy so it keeps the glue where it’s supposed to be!
This product is a great addition to any model builders work bench. It keeps the glue where you put it and if by chance you hit it you do not up set the bottle. The base finish is another enhancement to the modeling bench. The insert for the different glue bottle is a thoughtful addition along with the no slip self adhesive pad to put on the bottom of the base. Thank you Tankraft for a very useful addition to the modeling work bench.
This was long overdue for me, as evidenced by the spill marks in the foreground. Nevermore shall my clumsiness result in chaos on my cutting mat. Beautifully designed, and heavy enough to thwart even my ham fisted fumbling around the bench.
Had a major spill that wiped out the design on my cutting mat, and within 24 hrs I received an email that these beauties were back in stock! Perfect timing, Tankraft!
Jennings J R.
Nice, hefty item. Very nice mill work.
Looks good and works as designed. Prevents spilling the glue bottles.
Love my tank Matt’s, I have not received the glue holder yet. I am sure that it will be a great improvement over what I have now (nothing).
Just what I was looking for. Heavy enough with a no skid bottom to keep from spilling my glue. Looks better in person than in pictures with the green anodize finish.
Getting back into modeling. Spills were always a problem but this is a beautiful solution.
Perfect, please make a double and maybe a triple base. You would have a gold mine!
Well worth every penny for this glue base. I am so glad that purchased this. I have had thoughts about getting one from somewhere else that was 3-d printed. But I am very glad I came here first to get this one that is made from aluminum. I hope this company mades different bases from like sanding products, decal solutions, paint bushes, and other supplies that we modelers use.
Very nice product.
The glue base arrived in just a few days, much sooner than expected.
Upon opening the package, I was immediately impressed with the quality. It is well made and looks great sitting on my Tiger tank mat. It is heavy enough to make it very sturdy and the finish is first rate. It comes with a non-slip self-adhesive pad, that you can easily apply yourself. I use it for Tamiya liquid glue bottles, but it looks like it will work with just about any brand on the market. The glue base also comes with an adapter for use with smaller round bottles. I am very happy with this purchase and highly recommended it.
This will do the job nicely. Fits the square bottles of cement and panel line colors nicely. Tamiya square bottles are a bit smaller have a bit more play then the Mr. Cement bottles which fit perfectly inside the holder. The rubber pad on the bottom provides enough friction to hold it securely on the cutting mat with no slipping. I really like that as it allows me to screw and unscrew the bottle caps with one hand as sometimes the other one is busy holding a part or something to be glued together. I did do a "knock test" (because I'm a klutz) and it is still possible to hit the bottle and tip it out of the holder, but you would honestly have to hit it with a considerable amount of force to make this happen...and the holder itself doesn't budge...at all. I'd get another (maybe two) if they came in different colors. Honestly, anodized green is not my first choice but that's not a complaint about the product. More of a personal preference. Which I have to ask...when will it come in black?
Perfect for my Sherman mat!