FAQ

Store your mat flat out of direct sunlight.

Keep away from extreme hot and cold temperatures.

Avoid making repeated cuts in the same spot or bearing down with gorilla like force. Yes, it's called a self healing cutting mat, but it's not indestructible!

While the PVC material will resist most chemicals used in modelling, the print will not. Don't wipe up spills. You'll smear the printing. Either carefully blot with something absorbent or wait for the spill to dry.

You can clean using mild soap and water. Dry with a soft towel.

The mats are designed in the U.S.A. and manufactured in Taiwan.

They're made out of 3 sheets of 1mm new PVC material laminated together to form a mat that's 3mm thick. A hard center layer is surrounded by 2 self-healing layers. The surface layers can be cut by sharp blades without being overly damaged. The hard center prevents the blade from going all the way through.

Don't be fooled by cheaper less quality mats. 3 layer lamination is the way to go. Single layer mats don't provide adequate surface protection. Mats made from 5 layers usually have 2 very thin veneer layers of material on the outside and 3 inner layers of cheaper material.

The mats measure exactly as described. The dimensions given are not the dimensions of the grid or rulers. For example, 18x24 mats actually measure 18x24 inches.

The 12x18 mats weigh 1lb 4oz (.56kg) and the 18x24 mats weigh 2lbs 7oz (1.1kg).

Absolutely! The centimeter border and inside inch grid are accurate. The small squares along the inch lines are 1/16th of an inch.

But, really, when's the last time you actually used your model mat to measure anything? These are made for durability and good looks!

No, the mats are printed on one side only.

We picked 12x18 and 18x24 as these sizes are best suited to scale model builders and can easily fit on most work surfaces.

At the moment there are no plans to produce other sizes.

The Glue Base will hold most major brand modeling cements in square or round bottles - Tamiya, AK, Mr. Hobby and Ammo. The optional foam insert gets a better grip around the Ammo round bottles.

The Glue Base comes with the aluminum base, a foam holder insert and optional peel and stick rubber base pad as shown below.

The Titanium Hobby Knife comes with the knife handle, threaded cap, one blade installed, ten extra blades, a split ring for hanging, and a spare rubber o-ring.

Of course, it was designed for the Tankraft Titanium Hobby Knife!

It will also work on any standard craft knife with an 8mm diameter handle.

No. The tees are in stock and ready to ship. They're premium shirts printed for us in the USA.

The tees are constructed with side seams rather than from a tube of fabric like lesser quality shirts. This means they will fit less boxy than average tees.

Order a size larger if you like your t-shirts more roomy. There can be some shrinkage after washing.

Take a look at the sizing chart on the product page and compare the measurements to a shirt you already know fits.

It's best to turn the shirt inside out and wash in cold water. Tumble dry on low heat. Do not use chlorine bleach or iron the printing. Put on and build some tanks!

Your phone number can assist with delivery if there are any issues encountered by the carrier, especially with international orders.

Your phone number is never shared with anyone outside of the ordering and shipping process.

All orders placed on this website will ship direct from Florida, USA.

Mats are packaged in a protective plastic sleeve and shipped flat in a rigid heavy-duty mailer.

Shipping charges will appear during check-out.

Items will ship via UPS, FedEx, USPS or DHL depending on your location.

In the lower 48 US states Pro Modeler Mats ship for a flat rate of $9.99. All other items ship for free.

UK orders of Pro Modeler Mats ship for $9.99 from the UK. Other items ship by calculated rates from the US.

For everyone else shipping cost is calculated based on the weight of items ordered and your location.

Shipping charges will appear during the check-out process.

Yes! We welcome customers from around the world.

IMPORTANT! Please note that any additional fees, duties or taxes are the responsibility of the buyer and are not covered by the shipping cost quoted.

Additional fees typically apply to larger and heavier items that cannot be shipped regular international first class mail, such as the large cutting mats.

We have no control over these fees and do not have the resources to keep up to date on every country's import duties or carrier administrative fees. We do not make any money from these fees. Please take a moment to research what additional costs might be associated with placing an order before placing your order!

Mats can be shipped anywhere. Some other items may not be available to ship to your location, however.. You will receive an error notice when checking out. Just remove the item and continue to check out as normal.

Your order may be cancelled if we cannot ship to your location due to import restrictions or some other issue. A full refund will be provided to the original payment method.

We ship on Mondays and Thursdays each week.

Tracking information will be provided once your item ships. Orders within the continental U.S. should arrive in 10 business days. We can't accurately estimate shipping times for overseas orders, but it should not take more than 30 days to reach most locations.

No, we don't ship overnight or express due to cost considerations. Customers in the USA should receive their order in 3 to 5 business days.

But hey, they're worth the wait!

There's no need to return anything.

Just send us an email within 30 days of delivery if you're not completely satisfied with our product for a replacement or refund.

Please include your name, email, order number and a brief description of the issue with your request. Photos of any damage would be helpful too.

Refunds will be sent to the original payment method.

info@tankraft.com

Yes, we'd love to work with you!

Dealers must have a hobby related storefront and/or website.

Please contact us at sales@tankraft.com for more information about becoming a Tankraft authorized retailer.

We're located in Florida, U.S.A. Here's our business address:

Tankraft, 422 S. Military Trail, Deerfield Beach, FL 33073

Email is the best way to contact us: info@tankraft.com.

We try to respond to all emails within 24 hours. Please check your spam folder if you don't receive a reply.